|
|
|
|
|
地點：昆山市周市鎮周新公路20號
接洽人：王司理 13913227719
傳真：0512-55162719
E-mail:tozsen@163.com |
|
|
|
|
|
|
| 以后地位：首頁 > 產物中間 > 風冷式冰水機 |
|
| 風冷式冰水機 | 
TIC-A 款型風冷式生水機辨別是非立式離心泵飽和蒸汽壓縮管路，并遵循壓縮機負載保護、泵浦負載保護、逆相缺相告誡、制止結水保護、高
高負荷無球等裝配圖，服務器功能始終一致，時間長。 可急速溫度下降， 恒溫始終一致，知足企業客戶ajax請求。 此款型貨物基本控制熱冷調換的原因
中斷每日任務。共用于傳統第三產業中的保壓要素，且不受到事情溫度表的反應，并不可或缺的設施史詩游戲裝備擺放史詩游戲裝備。
TIC-A series of air cooled chiller adopts single stage steam compression circuit, and has compressor overload protection, pump overload
protection, reverse phase absence warning, prevent water formation protection, high and low pressure protection devices, stable performance,
long service life. Fast cooling, stable temperature control, to meet customer requirements. This series of products mainly apply the principle of heat and cold exchange to work. Applicable to the cooling field in modern industry, and is not affected by the ambient temperature, is an indispensable configuration equipment.
閉式冷卻塔溫度表規模較 5C- 35C;
304不銹鋼恒溫中冷器，防結凍無球配備 ;
設備劑包容 R22，設備導致好 ;
微凍二次回路辨別是非高、高壓力旋轉開關吃妻上癮 ;
收窄機及泵浦均遇過載保護 ;
認識自己邦普手機控溫器計算精度達 ±0.1C;
控制快速，戰略布局詳細，易修補 ;
低壓泵浦為標準規范輔助裝備，另自選用中壓或低壓泵浦 ;
可選裝展現出布置準備布置汽車水箱液位計 ;
容納谷輪收緊機 ;
TIC-A 風冷式得到套片式水冷卻器，水冷卻結局佳，熱管散熱快，不用再市場機制水正常情況下 ;
換成歐規自然管路型時，手機型號后加入 “CE”
Cooling temperature range 5C-35C;
Stainless steel insulated water tank, anti-icing protection device;
R22 refrigerant, good refrigeration effect;
The cryogenic circuit is controlled by high and low pressure switches.
Compressor and pump have overload protection;
Bang Pu computer temperature controller accuracy of ±0.1C;
Easy to operate, simple structure, easy to maintain;
Low pressure pump is standard, medium pressure or high pressure pump can be selected;
Optional addition of tank level gauge;
Adopt grain rotary compressor;
TIC-A air-cooled using sleeve condenser, heat transfer effect is good, fast heat dissipation, no need to provide cooling water;
When changing to EC safety loop type, add "CE" after the model
TIC-A 國產冰水機重中之重由縮水機、冷凝水機、供熱縮水閥盒汽化器4個組件制成，去接納雙吸式水蒸汽縮水冷庫安裝小編機制，使用冷庫安裝小編劑的液氣對方轉換成，發送盒開釋含糖量的意思，觸達冷庫安裝小編的成果。
TIC- A 系列作品電腦開機后，緊繃機 (1) 起頭責任，空調制熱劑在緊繃機的緊繃度化下成了各類進行高壓低壓高底溫有機廢氣混合氣體，往 A-B 的標地原則宿命 ; 在 B-C-D速度，各類進行高壓低壓高底溫的空調制熱劑有機廢氣混合氣體經過速度氣液分離器器 (2)，與學習學習氣氛引起熱互相交換，由氣態增加為氣態，同一被學習學習氣氛攜帶能量 ; D-E 速度，氣態的各類進行高壓低壓空調制熱劑經過速度供熱縮緊閥 (5)，壓起降，部分空調制熱劑由氣態增加為氣態，這個時候空調制熱劑為氣態和藹態兩相雜質的狀態 ;
E- A 過程中中，冷庫安裝小編劑所經過程中化掉器 (6)，在化掉器內與對流換熱系數序言引起熱對調，冷凝冷卻水到所要的氣溫，知足更改請求 ; 經化掉器后的有毒氣體冷庫安裝小編劑天道生死輪回趕回到收縮機，滿足一場冷庫安裝小編天道生死輪回。
TIC- A air- cooled water chillers include four main components, such as compressor, condenser, thermostatic expansion valve and evaporator.
The system adopts a single closed loop design for refrigeration system. Refrigerant is alternatively changed from ga搜尋剎車系統整合us to liquid state to absorb or release heat thus a cooling effect is achieved. When the machine is started, compressor starts working. Refrigerant is compressed into high pressure and high temperature gas in the process from A to B. In the process From B to C and D, this high pressure and high temperature gas is cooled when it is passing through the condenser and changed into liguid. Heat is taken away by the cooling air. In the process from D to E, the pressure of liquid refrigerant is reduced by expansion valve and a part of the refrigerant is changed from liquid to ga搜尋剎車系統整合us state. In the process from E to A, refrigerant absorbs the heat of process water in the evaporator and returns back to the compressor. This heat exchange process repeats until process water is cooled down to required temperature.
   
注：
1) 冷卻才可以是按照冒水口鎮室溫 12C，實際情況室溫 30°C 下測是 ;
2) 在 3φ，230V 時，緊繃機樣例為汽缸式 (TIC-3A~TIC-5A);
3) 制冷壓縮機劑可以選擇擇 R407C 壞保型制冷劑 ( 用 U 特征，打比方 : TIC-5A-U);
4) 此泵浦為內銷及內銷西南亞低配，合作方可依要殺意波動換裝中壓泵浦，比 : TIC-5A-P)，
也可殺意波動換裝直流高壓泵浦 ( 用 HP 特征，比喻 : TIC-5A-HP)，詳盡運作順次如上如下 ;
5) 該風冷式熱水機混用于情形的溫度 35℃以內的支配原則 ;
6) 器機電壓降可按客服懇請特別下單。
Note：
1) The refrigeration capacity is measured according to the outlet temperature of 12C and the ambient temperature of 30°C;
2) at 3φ, 230V, the compressor type is piston type (TIC-3A~TIC-5A);
3) Refrigerant R407C environment-friendly refrigerant (represented by U, for example, TIC-5A-U);
4) This pump is standard for domestic and export sales in Southeast Asia, customers can replace the medium pressure pump according to demand, such
as: TIC-5A-P),
High pressure pumps can also be replaced (represented by HP, for example: TIC-5A-HP), the specific parameters are shown as above;
5) The air-cooled chiller is suitable for use under the ambient temperature of 35℃;
6) Machine voltage can be ordered according to customer's special requirements. | | | 免費24小時全國空降: 免費24小時全國空降: |
|
|
| 
